BUSH C CLUTCH (6HP19/21) 35.47MM SHAFTS
# 98410

C Clutch Bush for 35.47mm Shaft

BUSH C CLUTCH (6HP19/21) 35.47MM SHAFTS

Fits units with 1.396" (35.47mm) shafts only.


Warning:

Caution: Use of an arbor press is required for correct installation. Do not use a hydraulic press or a bushing driver/hammer combination to install, as doing so will distort the bushing and cause fitment issues.


Symptoms:

  • Bushing wear
  • Bushing failure
  • B Clutch burned
  • Ratio codes

Cause:
OE bushing material composition allows premature wear.

Correction:
Install improved material Sonnax "B" clutch bushings to restore critical clearances and resist untimely wear.


ZF6HP19 and ZF6HP21 "B" clutch OE bushings have a tendency to wear out prematurely due to sub-optimal material composition. This wear can lead to bushing failure, ratio codes, and loss of correct pressure to the "B" clutch pack, resulting in burnt "B" clutches. This Sonnax improved "B" clutch bushing features superior wear characteristics, eliminating premature deterioration for worry-free operation.

Specifications:

  • Bushing Style: Precision
  • Material: Bimetal
  • Housing Bore: 1.516"
  • Shaft Dia.: 1.396"
  • Width: 0.394"

Type of Product: Bushes
Years: